Parts & Accessories

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate - Full-size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)